NINGBO CHAOMEI PLASTIC CO.,LTD
1. It is necessary to check whether the expansion reserve of the sunlight board is reasonable, whether the cutting size of the board is qualified, and whether the reserved expansion gap is even and sufficient.
2. When installing and fixing the solar panel and accessories, it is best to tear the protective film apart by 30mm to 50mm to avoid the accessory pressure strip from pressing the protective film.
3. If the solar panel has UV coating, it is important to distinguish between the UV resistant side facing outward and the side without UV coating facing inward during installation. Do not install it incorrectly.
4. If it is a hollow solar panel installation project, a minimum of 20mm space should be maintained at the edges of the panel connection, and the clamping accessories connected to each other in the solar panel installation project should have at least one rib missing.
5. After installing the accessories, tighten the connection screws of the sealing strip and plate evenly and do not use excessive force. If leakage occurs due to installation errors, timely use the sealing glue for treatment.
6. If it is necessary to drill and nail the board by oneself, it is necessary to consider the thermal expansion and contraction properties and principles of PC board, and leave reasonable gaps.
7. Check if there are any leaks after the board device is installed, and check all aspects that need to be noted, including appearance, quality, and so on.
Ningbo Chaomei Plastic Co., Ltd. is a plastic sheet production enterprise that integrates research and development, production, sales, material processing, warehousing, and distribution of high-quality polycarbonate (PC) sheets.
1. It is necessary to check whether the expansion reserve of the sunlight board is reasonable, whether the cutting size of the board is qualified, and whether the reserved expansion gap is even and sufficient.
2. When installing and fixing the solar panel and accessories, it is best to tear the protective film apart by 30mm to 50mm to avoid the accessory pressure strip from pressing the protective film.
3. If the solar panel has UV coating, it is important to distinguish between the UV resistant side facing outward and the side without UV coating facing inward during installation. Do not install it incorrectly.
4. If it is a hollow solar panel installation project, a minimum of 20mm space should be maintained at the edges of the panel connection, and the clamping accessories connected to each other in the solar panel installation project should have at least one rib missing.
5. After installing the accessories, tighten the connection screws of the sealing strip and plate evenly and do not use excessive force. If leakage occurs due to installation errors, timely use the sealing glue for treatment.
6. If it is necessary to drill and nail the board by oneself, it is necessary to consider the thermal expansion and contraction properties and principles of PC board, and leave reasonable gaps.
7. Check if there are any leaks after the board device is installed, and check all aspects that need to be noted, including appearance, quality, and so on.
Ningbo Chaomei Plastic Co., Ltd. is a plastic sheet production enterprise that integrates research and development, production, sales, material processing, warehousing, and distribution of high-quality polycarbonate (PC) sheets.
October 01, 2023
Email to this supplier
October 01, 2023
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
