Product characteristics of PC solar panels

The solar panel assembly system is mainly used for small facilities, such as garages, station awnings, rain eaves, greenhouses, and many other occasions that replace glass. When using the wet assembly method, the basic requirement is that the sealing system should be able to withstand a certain amount of movement of the board, allowing for thermal expansion without reducing its adhesion to the frame and board.

Ningbo Chaomei is a plastic sheet production enterprise that integrates research and development, production, sales, material processing, storage, and distribution of high-quality polycarbonate sheets.

Below, Super Beauty editor will share the product features of Sunshine Board.

1. Transmittance: PC solar panels have a transmittance of up to 89%, which can enhance the beauty of glass. UV coated panels will not undergo yellowing, atomization, and poor light transmission when exposed to sunlight. After ten years, the loss of light transmission is only 6%, while the loss rate of PVC is as high as 15-20%, and the loss rate of glass fiber is 12% -20%.

2. Impact resistance: The impact strength is 250 to 300 times that of ordinary glass, 30 times that of acrylic plates of the same thickness, and 2 to 20 times that of tempered glass. It has no cracks when dropped below two meters with a 3kg hammer, and is known as "unbreakable glass" and "sound steel".

3. UV protection: One side of the solar panel is coated with an UV resistant coating, and the other side has anti condensation treatment, which integrates UV resistance, thermal insulation, and anti dripping functions. It can block the passage of ultraviolet rays and is suitable for protecting precious artworks and exhibits from UV damage.