What is the sealing technology for PC solar panels

PC sunlight board is a new type of high-strength, waterproof, transparent, and energy-saving roofing material, mainly made from PC raw materials. PC solar panels are produced and manufactured using polycarbonate as the main raw material. Ningbo Chaomei Plastic is a plastic sheet production enterprise that integrates research and development, production, sales, material processing, warehousing, and distribution of high-quality polycarbonate (PC) sheets. It strictly implements the ISO9001 quality system and ROHS instructions.

Sealing technology for solar panels: The existing tape on the solar panel. It is only used for temporary protection of the edges of the board and is not resistant to aging. In installation engineering, the board must be cut according to size. After cutting, special engineering tape must be used to seal the hole grid at the end of the board according to the installation regulations, and the original tape must be replaced. The special adhesive tape for installation engineering should have good weather resistance, and be used for a long time without losing its adhesion and mechanical strength,

What are the points to pay attention to when applying adhesive tape during the installation operation of the solar panel?

(1) Ensure that the edges of the board are smooth.

(2) To blow all holes clean, compressed air must be free of any impurities and dry.

(3) Ensure that the tape is completely covered with profiles, metal covers, and U-shaped protective slots at the ends. After installation, there should be no exposed parts.