Production of red polycarbonate PC solar panels

      The cleaning method for 12mm red PC solar panels requires rinsing with warm water below 60 ℃ during cleaning. When cleaning the 12mm red PC solar panel, neutral detergent should be used, and it is not allowed to use detergents that have corrosive effects on the solar panel. 3. Please gently scrub with a soft cloth or sponge dipped in neutral solution. Prohibit cleaning with rough cloths, brushes, mops, and other hard and sharp tools. When there is grease, wet paint, or tape marks on the surface of a 12mm red PC solar panel, it can be wiped with alcohol using a soft cloth. The 12mm red PC solar panel must be thoroughly rinsed off with clean water to remove any dirt. Finally, use a clean cloth to dry and polish the board surface, without any obvious water stains. Special attention: Unsuitable cleaning agents are alkaline solutions that can corrode the surface of the board. Prohibit esters, ketones, halogenated hydrocarbons, and all substances that can dissolve or swell polycarbonate.

Thank you so much for your attention! We will try our best to service you in the polycarbonate sheet filed. We assure you ten years quality guarantee!!