10 years warranty Bayer polycarbonate

    When cleaning 5mm greenhouse polycarbonate panels, they must be rinsed with warm water below 60 ℃. Neutral detergents should be used during cleaning, and detergents that have corrosive effects on sunlight panels are not allowed. 5mm greenhouse polycarbonate board requires gentle wiping with a soft cloth or sponge dipped in neutral solution. Prohibit cleaning with rough cloths, brushes, mops, and other hard and sharp tools. When there is grease, wet paint, tape marks, etc. on the surface, a soft cloth can be used to wipe with alcohol. 5mm greenhouse polycarbonate panels must be thoroughly rinsed with clean water to remove any dirt. Finally, use a clean cloth to dry and polish the surface of the 5mm greenhouse polycarbonate board, without any obvious water stains. Special attention: Unsuitable cleaning agents are alkaline solutions that can corrode the surface of the board. Prohibit esters, ketones, halogenated hydrocarbons, and all substances that can dissolve or swell polycarbonate.